搜索结果: 1-6 共查到“船舶与海洋工程 Part B”相关记录6条 . 查询时间(0.226 秒)
On the Characteristics of an Absorbing Wavemaker with a Cross Section Having a Plumb Part near the Free Surface
Absorbing Wavemaker Active Wave Absorption FIR Digital Filter Absorption Efficiency Cross Section with a Plumb Part near the Free Surface Wave Reflection
2009/5/18
The characteristics of a plunger absorbing wavemaker are studied. In the present wave absorption system the wavemaker is controlled to absorb the incoming waves by means of digital filtering of wave e...
Stress Concentration Factors in Bilge Knuckle Part
Williams’ solution Stress Concentration Factor Bulk Carrier Container Ship Tanker Structure Finite Element Analysis
2009/5/12
The stress concentration factor in complex structure is important in the estimation of fatigue life and strength of the structure where nominal stresses are available in design stage. Extensive finite...
A Study of Thermal Stress Based on Metabolic and Radiation Heat for Improvement of Working Environment in Exposed Spaces(Part 1 Aspects of summer heat and storage of body heat)
Thermal Stress Metabolic Heat Radiation Heat Exposed Spaces
2009/4/30
As a recent tendency to take high interest in the environmental problem, the time has come to reconsider the present working conditions. The thermal environment at an exposed working place in a hot se...
A Study on Diffusing Aspect and Ventilation of Metallic Fume for Improvement of Working Environment in a Fabrication Shop(Part 1 Measurement of metallic fume)
Diffusing Aspect Metallic Fume Working Environment Fabrication Shop
2009/4/30
As a recent tendency to take high interest in the environmental problem, the time has come to reconsider the present working environment. Especially, air pollution caused by the generated metallic fum...
A Shape Optimization System of Ship Structures Using a Function Recognizing Structure Members- Shape Optimization of Double Bottom Part of Ship Structure -
Shape Optimization System Ship Structures Function Recognizing Structure Members
2009/4/29
A structure optimization for the initial design stage using FEM of ship is under consideration in this paper. General bulk carrier is selected for the object of the optimization. Shapes of a bottom st...
Shape and Size Optimization of Bottom Part of Ship Structure by Independent Mesh-subdivision Technique with Aide of Multiple Point Constraint
Ship Structure Independent Mesh-subdivision Technique Multiple Point Constraint
2009/3/26
A structure optimization for the initial design of ship is under consideration in this paper. A bulk career is selected for the object of the optimization. Both the shapes and the plate thicknesses ...