搜索结果: 1-6 共查到“机械工程 cross”相关记录6条 . 查询时间(0.187 秒)
Optimization Algorithms for Fully Automatic Optimizing Cross-cut Saw
optimizing cross-cut saw optimization optimization mode
2011/8/3
The optimization of boards by grades plays an important role in the production for cross cutting boards, and the outturn rate and utilization of boards are directly affected by the optimization result...
Momentum and Kinetic Energy Coefficients in Symmetrical Rectangular Compound Cross Section Flumes
Open channel Momentum coecient Energy coecient Flumes Compound cross section
2009/10/14
In this study a series of laboratory experiments was conducted in nine models of symmetrical rectangular compound cross section having di erent dimensions for a wide range of discharges in order to in...
Velocity Distribution in Channels of Rectangular Compound Cross Section
Open channel compound section velocity distribution
2009/10/14
A series of experiments have been carried out in order to measure velocity distribution in a straight symmetrical rectangular compound sections of varying floodplain width, main channel width and step...
Prediction of Aerodynamic Characteristics of Missiles with Circular and Noncircular Cross Sections
missile aerodynamics normal force center of pressure
2009/10/14
In this study, an engineering method is presented for computing the aerodynamic characteristics of missiles with circular, square, rectangular and elliptical cross sections. To predict the normal forc...
Determination of the continuous casting cross-section with prescribed average temperature
Solidification Stefan problem Heat equation Continuous casting
2011/3/17
This paper presents the method of determination of the continuous casting cross-section, in which average temperature was equal to a prescribed value. The method proposed here does not require evaluat...
Purpose: Lateral extrusion process with a lost core for cross fittings is suggested. At first, cavity of tube is filled up by low temperature melting melting alloy. Then low temperature melting materi...