搜索结果: 1-15 共查到“材料科学其他学科 s-process”相关记录16条 . 查询时间(0.062 秒)
The Poka-Yoke method as an improving quality tool of operations in the process
Quality management Mistake proofing Poka-Yoke method
2009/12/14
Purpose: A new approach for the implementation of quality philosophy Zero Quality Defects with usage of the Poka-Yoke method in the polish organization has been presented.
Design/methodology/approach...
Neural networks application for modeling carbonizing process in fluidized bed
Surface layer engineering Neuron networks Process modelling Artificial intelligent
2009/12/2
Purpose: This paper presents neural network model used for designing the assumed curve of hardness after carbonizing car drive cross in fluidized bed. This process is very complicated and difficult as...
Plaster mould casting process of AlSi11 alloy
Innovative materials and casting technologies Gypsum casting process Silumin TDA method
2011/4/1
The paper presents the results of the crystallization and cooling process of AlSi11 silumin in the plaster mould with TDA method and describes the impact of the preparation of plaster mould and liquid...
This paper presents the nature of process management and the basic process analysis. A general model of process management in a foundry is showed. The essential activities of processing, systems a...
This paper presents the nature of process management and the basic process analysis. A general model of process management in a foundry is showed. The essential activities of processing, systems a...
The influence of carbon and copper on the solidification process of the ferritic-austenitic cast steel
Innovative foundry materials and technologies Duplex cast steel Solidification Segregation DDTA
2011/3/31
Technological problems which occur during the production of castings made of ferritic-austenitic (duplex) cast steel have caused that this most modern material among corrosion-resistant cast steels i...
Purpose: Weathering effects on the weight and shrinkage strain of GFRC composite material are experimentally
investigated in this paper. The five samples with different percents of glass fibers are c...
EMS as a basis of sustainable technological process achievement
Environmental management Environmental management systems Technological process
2010/2/4
Purpose: The paper presents main principles of environmental management systems ISO 14001 and EMAS. Thanks to EMS organizations can improve theirs activity especially through environmental modernizati...
Mathematical and numerical model of directional solidification including initial and terminal transients of the process
Directional solidification Modelling Al-Cu
2011/3/17
The, developed in this study, simple model and numerical solution of diffusion growth of the solid phase under the conditions of directional solidification allow for the effect of constituent diffusio...
Numerical modelling of solidification process using interval boundary element method
Application of information technology to the foundry industry Solidification process
2011/3/17
In this paper an application of the interval boundary element method for solving problems with interval thermal parameters and interval source function in a system casting-mould is presented. The task...
Application of the dual reciprocity boundary element method for numerical modelling of solidification process
Application of information technology to the foundry industry Solidification proces
2011/3/17
The dual reciprocity boundary element method is applied for numerical modelling of solidification process. This variant of the BEM is connected with the transformation of the domain integral to the bo...
Numerical analysis of the 45 mm reinforcement bar rolling process
Numerical techniques FEM Groove-rolling
2010/2/8
Purpose: The paper presents the results of theoretical investigations of the process of rolling reinforcement bars designed for concrete reinforcement. In the investigation. particular consideration w...
The effect of refractory coating permeability on the Lost Foam Process
Metalcasting Lost foam Foamed polystyrene patterns
2011/3/15
The article analyses the effect of refractory coating permeability on the process of casting manufacture by the Lost Foam technique. The analysis was focussed on simulation tests examining the effect ...
Using the EFQM excellence model to the process assessment
Quality management Quality improvement The EFQM Excellence model
2010/2/8
Purpose: The aim of this paper is showing the EFQM Excellence Model approach. In this paper it was introduced the usage of the EFQM Excellence Model not only in the whole organization but also in the ...
Numerical modelling of the bimetallic reinforcement bar rolling process
Numerical techniques FEM Groove-rolling
2010/2/9
Purpose: New kind of reinforcement bars are bimetallic reinforcement bars which has a higher corrosion resistance and mechanical properties, than the standard bars. The bimetallic bars are more and mo...