搜索结果: 1-7 共查到“无机非金属材料 the analysis”相关记录7条 . 查询时间(0.305 秒)
Quantitative analysis of the fibre content distribution in CFRP composites using thermal non-destructive testing
Non-destructive testing Thermography Fibre content CFRP composites
2010/8/16
Carbon fibre reinforced plastic (CFRP) composites are one of the most attractive materials for high performance applications in modern aerospace and aircraft industry due to their high strengthand sti...
Solidification analysis of AMMCs with ceramic particles
Composites Casting Solidification analysis Silicon carbide
2009/12/1
Purpose: In the research work the result of the reinforcement displacement and solidification analysis for aluminium
cast composites with ceramic particles have been presented. The results of researc...
Quantitative Phase Analysis of Polymorphs in MgO-Partially Stabilized-ZrO2 using X-Ray Diffraction
Zirconia X-Ray Diraction Quantitative Phase Analysis
2009/10/13
In this study, quantitative analysis of polymorphs in ZrO2-based ceramics using powder X-ray difiraction was carried out. For this purpose, three partially stabilized ZrO2 compositions having 8-10 mol...
Analysis of carbon partitioning during ausferritic reaction in ADI
Retained austenite Ausferrite Austempering Ductile iron
2011/3/15
The investigation was carried out to examine the influence of temperature and times of austempering process on the maximum extend to which the ausferritic reaction can proceed and the carbon content i...
Finite element analysis of the interaction between an AWJ particle and a polycrystalline alumina ceramic
Numerical techniques Abrasive waterjet machining Brittle fracture model
2010/2/10
Purpose: Abrasive waterjet cutting involves use of a high pressure, abrasive laden waterjet at trans-sonic speeds to cut difficult-to-machine materials. The jet-material interaction depends on the nat...
Crystallization analysis of AlSi7Mg (AK 7) alloy with use of 'ATND' method
Metallography Creep-resistant austenitic cast steel Additions of Nb and Ti
2011/3/11
In this study, taking as an example the creep-resistant austenitic cast steel, the results of the investigations were presented whose aim was to show what effect the specimen surface condition, discus...
Analysis of Carbon Diffusion during Bainite Transformation in ADI
Carbon diffusion Decarburisation Bainite Ductile iron ADI
2011/3/11
The paper presents an investigation of the time required for the diffusion of carbon out of supersaturated sub-units of ferrite into the retained austenite. The analytical model estimates the decarbur...