搜索结果: 1-5 共查到“无机非金属材料 s-process”相关记录5条 . 查询时间(0.078 秒)
Compaction of the diamond – Ti3SiC2 graded material by the high – speed centrifugal compaction process
High-speed centrifugal compaction process Sedimentation Barnea-Mizrahi equation
2009/12/1
Purpose: Sedimentation of particles in a viscous fluid is a main physical problem in fluid mechanics.
Sedimentation is benchmark of one of the technica; methods to produce the functionally graded mat...
Investigating the kinetics of the binding process in moulding sands using new, environment-friendly, inorganic binders
Innovative materials and foundry technology New inorganic binders
2011/3/15
The article discusses the results of an investigation carried out on the chemically bonded and CO2 blown moulding sands using selected, modified inorganic binders. The investigations make an important...
Pressure of gas in gas gap during Lost Foam Process
Foundry engineering Lost foam Foamed polystyrene patterns
2011/3/11
In the study, a model and some fundamental relationships describing changes of gas pressure in the gas gap during manufacture of castings by the Lost Foam process were described. The mathematical desc...
A visualization of the eutectic solidification process
Solidification Visualization Eutectic grain Halo formation
2011/3/11
The study presents a visualization of the sequence of formation of eutectic grains during solidification in volume and directional solidification of model organic materials from the system of salol (f...
The influence of organic fibre types on technological parameters in process of ceramic moulds making
Innovative casting materials and technologies Investment moulding method
2011/3/11
The research being presented in this article has been set up with the aim of working out both the technology and starting up manufacturing process ( in which a new generation of ceramic slips is emplo...