搜索结果: 1-10 共查到“材料科学 cooling rate”相关记录10条 . 查询时间(0.078 秒)
Cooling rate influence on microstructure of the Zn-Al cast alloy
Metallic alloys Derivative thermo analysis Zn-Al alloy Microstructure
2010/8/17
Properties of cast zinc alloys are comparable to these of aluminium alloys. Differences are connected to a lower melting temperature and bigger density. Zinc has a density of 7.14g/cm3, melting temper...
Derivative thermo-analysis application to assess the cooling rate influence on the microstructure of Al-Si alloy cast
thermo-analysis assess cooling rate microstructure Al-Si alloy cast
2010/8/12
Copper and magnesium addition enable to perform precipitation hardening of the multicomponent aluminium alloys with silicon, by precipitation of the Al2Cu or Mg2Si phase particles. However copper addi...
The effect of cooling rate on microstructure and mechanical properties of AC AlSi9Cu alloy
Aluminum alloys Cooling rate Thermal characteristics Secondary Dendrite Arm Spacing
2009/12/1
Purpose: In this work the effect of cooling rate on the size of the grains, SDAS, size of the β precipitation and
thermal characteristic results of AC AlSi9Cu cast alloy have been described. The soli...
Effect of modification and cooling rate on the microstructure of IN-713C alloy
Nickel superalloys Microstructure Cooling rate Modification Microanalysis
2011/4/1
The results of investigations of the effect of modification and cooling rate on the microstructure of castings made from IN-713C nickel superalloy were described. As an inoculant, cobalt aluminate CoA...
Effect of modification and cooling rate on the macrostructure of IN-713C alloy
Nickel superalloys Macrostructure Cooling rate Modification Equiaxial grains Shape factor
2011/3/31
The results of investigations of the effect of modification and cooling rate on the macrostructure of castings made from IN-713C nickel superalloy were described. As a modifier, cobalt aluminate CoAl2...
Effect of modification and cooling rate on the macrostructure of IN-713C alloy
Nickel superalloys Macrostructure Cooling rate Modification Equiaxial grains Shape factor
2011/3/31
The results of investigations of the effect of modification and cooling rate on the macrostructure of castings made from IN-713C nickel superalloy were described. As a modifier, cobalt aluminate CoAl2...
Influence of cooling rate on the structure and mechanical properties of G17CrMoV5 - 10 cast steel
Heat treatment Mechanical properties Cast steel Bainite
2011/3/31
The paper presents results of research on the influence of cooling rate on the structure and properties of G17CrMoV5 – 10 (L17HMF) cast steel. The material for research was a section taken out from...
Influence of cooling rate on the structure and mechanical properties of G17CrMoV5 - 10 cast steel
Heat treatment Mechanical properties Cast steel Bainite
2011/3/31
The paper presents results of research on the influence of cooling rate on the structure and properties of G17CrMoV5 – 10 (L17HMF) cast steel. The material for research was a section taken out from...
Influence of cooling rate on
cast Ni – base superalloy carbides and Jc - phase metallographic evaluation heat treatment cooling rate influence
2011/3/30
The Ni – base superalloys, which are combined an unique physical and mechanical properties, are used in aircraft industry for production of aero engine most stressed parts, as are turbine blades. From...
Influence of cooling rate on
cast Ni – base superalloy carbides and Jc - phase metallographic evaluation heat treatment cooling rate influence
2011/3/30
The Ni – base superalloys, which are combined an unique physical and mechanical properties, are used in aircraft industry for production of aero engine most stressed parts, as are turbine blades. From...