搜索结果: 1-15 共查到“工学 duplex”相关记录28条 . 查询时间(0.046 秒)
2017未来无线网络全双工通信研讨会(Workshop on Full-Duplex Communications for Future Wireless Networks)
未来无线网络全双工通信 研讨会
2017/3/30
The emerging 5th generation and beyond wireless systems will experience a significant increase on the number of connected devices and high volume of data traffic. Additionally, high traffic load varia...
Full Standard Triple-Play Bi-Directional and Full-Duplex CWDM Transmission in Passive Optical Networks
Fiber optics optical communications All-optical networks
2015/5/25
Bi-directional CWDM radio-over-fiber transmission of triple-format full-standard OFDM signals in coexistence (UWB, WiMAX and LTE) (1.178 Gbit/s full-duplex) is demonstrated over 50.6 km SSMF in passiv...
On an ONU for Full-Duplex 10.5 Gbps/λ with Shared Delay Interferometer for Format Conversion and Chirp Filtering
ONU Full-Duplex 10.5 Gbps/λ Shared Delay Interferometer Format Conversion Chirp Filtering
2015/5/21
Chirped IRZ downstream is used together with a delay interferometer and a RSOA at a low complexity ONU for full-duplex 10.5Gbps transmission on a single wavelength, supported by modulation format conv...
All-Optical Carrier Recovery with Periodic Optical Filtering for Wavelength Reuse in RSOA-based Colorless Optical Network Units in Full-Duplex 10Gbps WDM-PONs
Fiber optics communications Modulation All-optical devices
2015/6/10
Optically assisted downstream cancellation for wavelength reuse in WDM-PONs is demonstrated, allowing downstream extinction ratios up to 9dB for symmetrical full-duplex data transmission at 10Gbps wit...
Cost Efficient Directly Modulated DPSK Downstream Transmitter and Colourless Upstream Remodulation for Full-duplex WDM-PONs
Optical communications Phase modulation
2015/6/4
We implement a cost efficient 10.7Gb/s directly modulated DPSK transmitter in a bidirectional WDM-PON, which also remodulates the downstream phase encoded signal for 2.5Gb/s OOK upstream transmission.
Yield stress of duplex stainless steel specimens estimated using a compound Hall–Petch equation
Yield stress duplex stainless steel specimens estimated compound Hall–Petch equation
2010/10/12
In this study, the 0.2% yield stress of duplex stainless steel was evaluated using a compound Hall–Petch equation. The compound Hall–Petch equation was derived from four types of duplex stainless stee...
Innovative PM duplex stainless steels obtained basing on the Schaeffler diagram
Sinter-hardening Powder metallurgy Duplex stainless steel
2009/12/2
Purpose: The purpose of this paper was to describe the sintered duplex stainless steels manufactured in sinterhardening
process and its usability in field of stainless steels and moreover using compu...
Microstructural evolution in a duplex cast steel after quench ageing process
Casting Heat treatment Quench ageing
2009/12/1
Purpose: The effectiveness and usefulness of the quench ageing on the service properties of massive duplex cast
steel was presented in this work. The mechanism of precipitation of a ε-Cu phase and i...
The influence of hot-working processing on plasticity and structure of duplex steel
Superplastic materials Plastic forming Microstructure
2009/12/1
Purpose: There are numerous branches of industry where the (α+γ) duplex steels have not yet been sufficiently
popularised due to problems with their forming, resulting from different properties of t...
Properties of duplex stainless steels made by powder metallurgy
Mechanical properties Powder metallurgy Duplex stainless steel Strength
2009/12/1
Purpose: of this paper was to examine the mechanical properties of duplex stainless steels.
Design/methodology/approach: In presented study duplex stainless steels were obtained through powder
metal...
Effect of microstructure on impact toughness of duplex and superduplex stainless steels
Ductility Duplex stainless steels Heat treatment Impact toughness
2010/1/19
Purpose: of this paper is to study the effect of heat treatments and resulting changes in microstructure on mechanical properties, mainly impact toughness, of commercial 2205 duplex stainless steel an...
Problems in repair-welding of duplex-treated tool steels
repair welding nitrided tool steel PVD coating die casting
2009/10/23
The present paper addresses problems in laser welding of die-cast tools used for aluminum pressure die-castings and plastic moulds. To extend life cycle of tools various surface improvements are used....
Determination of Diffusable Hydrogen in Duplex Stainless Stell Welds
Duplex stainless steel Diusion of hydrogen Hydrogen measurement Oerlikon/Yanaco methods
2009/10/13
The risk of hydrogen cracking in steel welds depends on a number of interrelated factors, the most important of which is the hydrogen content that originates from the welding consumable. In designing ...
Determination of Susceptibility to Intergranular Corrosion of UNS 31803 Type Duplex Stainless Steel by Electrochemical Reactivation Method
Duplex stainless steel Sigma phase Secondary austenite Electrochemical potentiostatic reactivation
2009/9/30
Specimens taken from a hot rolled cylindrical duplex stainless steel (DSS) bar with 22% Cr and 5% Ni
grade were solution annealed at 1050 ◦ C and then sensitization heat treatments were conduct...
C+L Band Remote Node for Amplification in Extended Reach Full-Duplex 10Gb/s WDM/TDM Passive Optical Networks
C+L Band Remote Node Extended Reach Full-Duplex WDM/TDM Passive Optical Networks
2015/7/20
A remote node design for C+L band amplification is shown to cover the advanced optical power budget for a 50km reach, symmetrical 10G/10G WDM/TDM-PON. 5-10dB of margin is left despite OSNR degradation...