搜索结果: 1-7 共查到“veneer”相关记录7条 . 查询时间(0.093 秒)
Performance of a Panelized Brick Veneer Wall System under Lateral Loads
Brick Veneer Steel Stud Lateral Loads Panelized Building Envelope Wind Load Test Racking Test
2013/1/31
This paper discusses the performance of a proposed panelized brick veneer over steel stud backup wall system and seismic isolation connections under lateral loads. The panelized wall system was develo...
Out-of-plane seismic performance and fragility analysis of anchored brick veneer
Brick masonry veneer Metal tie connections Fragility analysis Nonlinear dynamic analysis
2012/4/26
The out-of-plane seismic fragility of single-story brick veneer walls built over a wood frame backup was evaluated analytically. Two-dimensional (2-D) finite element (FE) brick veneer wall strip model...
Fungicide and insecticide properties of cardboard panels made from used beverage carton with veneer overlay
Antifungal insecticide composite recycling used beverage carton wood veneer
2011/1/10
This study evaluated fungicide and insecticide properties of the cardboard substrate panels overlaid with beech veneer. The experimental cardboards from recycled food and beverage carton containers ha...
Effect of Crossbanded laminates on the Bearing Properties of Mechanical Joints of Laminated Veneer Lumber with a Drift Pin
crossband LVL bearing properties ductility ratio bearing energy loading speed
2009/3/6
To investigate the effects of crossbanded laminate ratios in laminated veneer lumber (LVL) on its bearing properties, tension-type bearing strength tests of drift-pin joints were made. The LVLs of par...
Aldehyde and Volatile Organic Compound Emissions from Laminated Veneer Lumber
LVL formaldehyde VOC small chamber method
2009/3/6
Aldehydes and volatile organic compounds (VOCs) emitted from commercial laminated veneer lumber (LVL) were determined using the JIS small chamber method for 21 days. LVL samples were made from three ...
Optimization of Veneer Cutting of Sugi I.Fundamental investigation of minimum chip thickness
veneer cutting cutting force burnishing force sugi chip thickness
2010/3/4
Using a test tool with sharp cutting edge, tool angle 30° and clearance angle 0°, the effect of the undeformed chip thickness on the cutting performance in modeled veneer cutting of sugi was investiga...
Some Technological Properties of Laminated Veneer Lumber Manufactured from Pine（Pinus sylvestris L.）Veneers with Melamine Added - UF Resins
LVL resin type climate condition technological properties formaldehyde emission
2009/1/13
The objectives of this study were to compare the modulus of elasticity, bending strength, shear strength and formaldehyde emissions of laminated veneer lumber (LVL) bonded with melamine added urea for...