搜索结果: 1-14 共查到“复合材料其他学科 Composite”相关记录14条 . 查询时间(0.156 秒)
Laser remelting of Al-Fe-TiO powder composite on aluminium matrix
Composites Laser Intermetallic phases
2009/12/14
Purpose: Synthesis of the AlFeTiO3 composite powder lead to formation metal matrix composite layer. The formation of an in-situ surface layer was carried out on aluminium alloy substrate using laser c...
Numerical models of polymeric composite to simulate fatigue and ageing processes
Composites Numerical models Non-Destructive testing Degradation
2009/12/14
Purpose: of this paper was to prove the possibility of applying numeric model of polymer composite, consisting of finite elements, to simulate dynamic acoustic and thermal processes. Characteristics o...
Intelligent epoxy matrix composite materials consisting of Tb0.3Dy0.7Fe1.9 magnetostrictive particulates
Magnetic properties Tb0.3Dy0.7Fe1.9 Magnetostrictive composite materials
2009/12/3
Purpose: This paper presents the acceptable technology to fabricate epoxy-bonded Tb0.3Dy0.7Fe1.9 composites in an effort to produce Tb0.3Dy0.7Fe1.9 bulks with good magnetostrictive properties through ...
The solidification process of the AK12/SiC+C composite suspension in various heat exchange conditions
Composites Solidification Thermovision Structure
2009/12/2
Purpose: In the research work the result of the structure and solidification analysis for aluminium cast composite
with ceramic particles in different solidification conditions have been presented. T...
Sintered composite gradient tool materials
Sintering Composite materials Gradient materials Tool materials
2009/12/2
Purpose: Development of a new generation of the composite gradient tool materials with the core sintered with
the matrix obtained using the powder metallurgy of the chemical composition corresponding...
Solidification curves and structure of heterophase composite
Composites PAMMC Solidification
2009/12/2
Purpose: This paper presents results of solidification tests for homo- and heterophase composites. Researches
concerned influence of reinforcement particle for solidification process of composite mat...
The effect of design on adhesive joints of thick composite sandwich structures
Thick composites Sandwich structures Adhesive bonding
2010/1/19
Purpose: of this paper is to provide the joint the behavior caused by the material, pre-stress, bonding thickness
and the tongue length.
Design/methodology/approach: A simple but effective design ca...
Influence of binder composition on structure and properties of carbide alloyed composite manufactured with the PIM method
Powder metallurgy Powder Injection Moulding Feedstock
2010/2/4
Findings: Examination of the effect of the binder type and portion on structure and properties of the experimental tool materials with the cermets structure revealed that using the stearic acid not on...
Modern composite materials manufa-ctured by pressure infiltration method
Composite materials Infiltration Structure
2010/2/4
Purpose: The purpose of this paper is to present the technique of manufacturing the composite materials based on porous ceramic preforms infiltrated by liquid aluminium alloy and examination of the st...
Durability of crosslinked polydimethylsyloxanes: the case of composite insulators
durability composite insulators PDMS silicone post-crosslinking
2010/10/12
Most applications of silicones are linked to their hydrophobic properties and (or) their high
resistance to ageing (e.g. thermal ageing and photoageing). However, when placed in extreme
environments...
Identification of composite materials at high speed deformation with the use of degenerated model
Computational mechanics Impact load Impact Composites
2010/2/4
Purpose: Composite materials on account of some their characteristics have application in a construction of ballistic shield. An example of the ballistic shield is laminate with the mix-structure mate...
Application of pressure infiltration to the manufacturing of aluminium matrix composite materials with different reinforcement shape
Composites Ceramic preforms Infiltration
2010/2/9
Purpose: The purpose of this work is to investigate the influence of reinforcing phase’s shape on structure and properties of composite materials with aluminium alloy matrix.
Design/methodology/appro...
Influence of loading on wear of composite material FeAl-Al2O3
innovative materials and foundry technologies foundry composite
2011/3/10
In the paper, the authors showed the results of studies on influence of production conditions on composite material properties during intermetalic phase Fe-Al reinforced by Al2O3 particles.
The quality of the recovered matrix material as an element of assessment of effectiveness of the composite recycling process
metal composites with reinforced matrix recycling assessment of the process effectiveness
2011/3/11
Metal composites are ever more readily used as structural materials, due to their properties. Therefore, in spite of their difficult processing, their use constantly grows (e.g. SGL Carbon Poland S.A....