搜索结果: 1-8 共查到“工学 weldability”相关记录8条 . 查询时间(0.093 秒)
Weldability of Copper-bearing Aging Steel
copper-bearing aging steel weldability acicular ferrite bainite softening
2011/8/4
The weldability of copper-bearing aging steel is evaluated using calculated cracking susceptibility index Pcm, oblique Y-groove cracking test, heat-affected zone (HAZ) maximum hardness measurement, su...
Weldability of Copper-bearing Aging Steel
copper-bearing aging steel weldability acicular ferrite
2011/8/4
The weldability of copper-bearing aging steel is evaluated using calculated cracking susceptibility index Pcm, oblique Y-groove cracking test, heat-affected zone (HAZ) maximum hardness measurement, su...
Weldability of 440 MPa galvanized steel with inverter DC resistance spot welding process
Resistance spot welding SPRC440 SGARC440 Inverter DC spot welding system Lobe diagram
2010/8/17
Resistance spot welding is a process that uses resistance Joule heat which occurs when a high current is applied with contact resistance that exists between metals and their specific resistance. This ...
Weldability of pulse GMAW joints of 780 MPa dual-phase steel
Welding Pulse GMAW EN ratio Advanced High Strength Steel (AHSS) DP 780
2010/8/16
Because of the recent increase in oil prices and people’s growing interest in environmental issues through the world, automobile makers have conducted various studies on improving fuel efficiency thro...
Ferritic-austenitic steel and its weldability in large size constructions
Duplex steel Welding Microstructure Properties and Testing of welded joints
2009/12/14
Purpose: On the basis of sources and own experiments, the analysis of microstructure, properties, applications as well as material and technological problems of ferritic-austenitic steel welding were ...
Weldability of class 2 armor steel using gas tungsten arc welding
Gas tungsten arc welding Welding parameters optimization Armor steel
2009/12/2
Purpose: In this study, microstructural and mechanical evaluations of class 2 armor steel after single-pass and
pre-heated/single-pass welding were investigated to reveal the effect of pre-heating on...
Weldability during the laser lap welding of Al 5052 sheets
Welding Laser welding Aluminium alloy Lap welding
2009/12/2
Purpose: The paper presents the effect of the laser welding parameters of the laser focal position, the welding
speed and the laser output power on the weldability of Al the 5052 alloy during laser l...
Bead-on-plate weldability of Al 5052 alloy using a disk laser
Welding Laser welding Aluminium alloy
2010/2/4
Purpose: The paper presents the effect of the laser welding parameters of the laser focal position and beam angle on the weldability of an Al 5052 thick plate using a 4kW disk laser.
Design/methodolo...